-
Dbh-15p (female) welding wire type needle white glue connector
Product Name: dbh-15p (female) welding wire type needle white glue
Temperature resistance: 230 degrees
Interface type: HDMI
Characteristics: high temperature resistance 230 ° C
Scope of application: widely used in all kinds of household appliances, electric toys
Digital products, modern office equipment, industrial control and monitoring communication equipment, etc. -
Brake oil pipe joint auto refitting parts alignment An3 to M12 * 1.0 / M10 * 1.0
Counter wire An3 to M12 * 1.0
Counter wire An3 to M10 * 1.0 -
SPEEDWOW AN 3 4 6 8 10 12 16 AN Oil Hose End Fitting Tool Spanner V Bayonet Adjustable Aluminum Wrench Fitting Tool Spanner
Material: T6061 Aluminum
Condition: Brand new
Feature: Light V Bayonet
Color: Black / Red / Bule / Silver
Is_Customized: Yes
Advantage: Protect fittings when installation
Package Included:
1 X Adjustable Aluminum Wrench -
Bulk head nut an6 / an8 / an10 oil cooler oil pipe nut bulkhead screw for automobile modification
Product Name: bulkhead nut
Product specification: An3 / an6 / an8
Material: aluminum alloy
Color: the surface is very blue, and various colors can be customized -
Clip An3 / 4 / 6 / 8 / 10billet aluminum line separator
Product Name: new billet aluminum line separators * 2
Product specification: 9.5mm
Material: aluminum alloy
Color: red and blue
Scope of application: Automobile Gasoline aluminum pipe modification and oil circuit layout to make the oil circuit layout more beautiful and orderly. -
An oil pipe nut / aluminum screw / nut / special nut for automobile refitting small aluminum pipe tube nut
Product Name: tube nut (aluminum tube gasoline tube nut / nut)
Product specification: an4 / an6 / an8 / an10
Material: aluminum alloy
Color: very blue on the surface -
Refitting high-pressure an oil pipe clamp an oil pipe clamp an oil pipe clamp an4, an6, an8
Aluminum alloy forging, durable. If the quantity is large, the company can also customize the connector. -
New steel hollow screw bolt m1010 an4
The current inventory includes:
Steel screw, hollow screw M10 * 1.0, total length of bolt is 20mm
Steel screw, hollow screw an4, total length of bolt is 25mm
There are many other products that can be booked. -
hydraulic handbrake
Principle of refitting hydraulic handbrake:
The professional name of the hand brake is the auxiliary brake. Different from the principle of the brake, it is connected to the rear brake shoe with a steel wire cable to brake the car. Long term use of the handbrake will cause plastic deformation of the steel wire. Because this deformation is unrecoverable, long-term use will reduce the utility and increase the travel of the handbrake.
The return spring is also used with the handbrake. When the hand brake is pulled up, the spring is elongated; The handbrake is released and the spring returns to its original length. When the handbrake is used for a long time, the spring will also deform accordingly.
Test:
1、 Listen to the "click" sound while pulling the car handbrake until the handle is pulled to the end, and then calculate the position of 70% of the total sound. This position is the effective working point of the car handbrake.
2、 Generally, the normal position is between five and seven squares. Then, check the efficiency of the car handbrake, that is, to see if the handbrake can work effectively.
3、 Drive the car to the slope with large slope and good road condition, step on the brake pedal, shift to neutral, pull the car hand brake to the working point just determined, and slowly release the brake pedal. If the car does not slide, it indicates that the hand brake has good efficiency. Or the car will slide slightly, but the sliding distance is very small, and the efficiency of the handbrake is normal.
4、 Uphill and downhill should be done once respectively. If it is found that the braking efficiency or sensitivity of the car hand brake is not ideal, it can be solved by adjusting the pull wire of the hand brake. You'd better not do it yourself. You should go to the maintenance shop as soon as possible and hand it over to professional maintenance personnel. -
150 degree An6 push on modified oil cooler oil pipe quick connector red blue plug-in intubation
This product is produced in Taiwan factory, with high-grade quality, ensuring no oil leakage and absolutely safe installation. In terms of design structure, safety, no oil leakage and performance, it is different from the goods produced by Taizhou Sanmen in the market. Please pay attention to identification.
An3 to an20 are available, and direct, 45 degrees, 90 degrees, 120 degrees, 150 degrees and 180 degrees are available. Part must be considered according to quantity.
Please also note: because the color requirements of customers will be slightly different during mass production in the factory, and the anodizing is made according to the color required by customers during mass production, the delivery color may be slightly different. If there are significant differences, we will inform you in advance. The quantity is large, and the colors can be customized (more than 20 for each model, and the total quantity is more than 100), but the delivery time is 15 days. -
oil circuit quick connector
Product Description: quick disconnect fittings for fuel line use
Material: Titanium;
Application: for for oil cooler, turbo charger, braking ;
Specification: AN4,AN6.AN8.AN10.AN12 -
BULKHEAD NUT AN6/AN8/AN10
Product Name: bulkhead nut
Product specification: An3 / an6 / an8
Material: aluminum alloy
Color: the surface is very blue, and various colors can be customized -
AFT-17_AN SPANNER WITH INSERTS-A WITH INSERTS-B
This is alloy wrench for oil cooler oil pipe joint refitted from automobile. All of our Alloy wrenches are made of high quality alloy and colorful anodized and size stamped. AN3-AN16.Fast connection design, easy to install, simple to use. Using colorful design, not only durable, but stylish, personalized to meet the modern demand for tools.While working also can brings you relaxed and cheerful good mood.We can also design according to your needs. -
Female Flare Swivel, AN3 to AN16
Female Flare Swivel, AN3 to AN16 sizes are available, straight, 45 degree, 90 degree are available.
TOP QUALITY TYPE. Produced by joint venture with Taiwan factory. -
Two layers SS Braided Hose
Price Quoted are based on MOQ of 30 meters per size; Discounts will be offerred if quantity is bigger: Higher pricing if Quantity is lower than 30 meters.
They are produced by our joint venture with Taiwan factory.Quality same as those made in Taiwan.
Advantage in our braided hose compared with other suppliers in China: 1. AN4 to AN16 sizes available
2.OK for fuel, oil, water and heater, most hoses from other suppliers only ok for oil. That means inner tube material are different.
3. higher heat resistant
4. higher working pressure.
5. Knitting quality is much better.
-
Plastic shell
Product Description: Plastic shell
Market or Client: France
Application: Not Known
Material: ABS.
Processing: Injection.
Specialty of this item: good mating quality.
NOT FOR SALE. Mold ownership belong to our clients.
-
Louderspeaker gasket
Product Description: Louderspeaker gasket
Market or Client: Canada
Application: gasket for audio system /Louderspeakers
Material: NBR.
Processing: rubber molding.
Specialty of this item: Antistatic.
NOT FOR SALE. Mold ownership belong to our clients.
-
Injection Mold for POM Material Pulley Spring Bushing
Product Description: Delrin POM material, Mold steel MOVCR12, Pulley Spring bushing /Mold for POM plastic injection part
Mold Steel (Core & Cavity/ Mold Base): MOVCR 12 / P20
Part's Material: Delrin
Application: industrial
Market or Client: USA -
AP-R1 & AP-R1 WS Plate /injection Molds
Product Description: Molds for Germany, ABS/PC molds, cheaper as used moulds /custom plastic injection Mold
Mold Steel (Core & Cavity/ Mold Base): MOVCR 12 / P20
Part's Material: ABS,PC
Application: industrial
Market or Client: Germany
Specialty of these molds: each mold of 2 caviities mold, one cavity of gloss finish, the other cavity of VDI34 texture finish,
"Rotatable nozzle for a quick change between high gloss and structure texture"
---hot runner, with valves control to close or open the cavity you want to inject, which means you can inject the gloss part (by shutoff the VDI34 cavity valve) or inject the VDI34 part (by shutoff the gloss cavity valve) or inject both cavities at the same time (by opening both valves).
Automatic falling /automatic running. -
Custom plastic spoon injection Mold
Product Description: Custom high polished high gloss plastic spoon American standard injection Mold and plastic injection part manufacturing.
Mold Steel (Core & Cavity/ Mold Base): Core & Cavity 718 steel, Mold Base P20 steel
Part's Material: PP
Application: industrial
Market or Client: USA
